fff&pigpokers&insomniacs

    Help ID steel tractor wheels

    Share
    avatar
    willowbilly3

    Posts : 1734
    Join date : 2010-01-30

    Help ID steel tractor wheels

    Post by willowbilly3 on Thu Feb 07, 2013 5:55 pm

    46" tall and 11 inches wide with lugs held on b y 2 bolts. Center hub is splined.
    This is the closest picture I can find, pretty close but not enough detail in the pic.
    http://www.tractorshed.com/contents/ts160.htm
    avatar
    willowbilly3

    Posts : 1734
    Join date : 2010-01-30

    Re: Help ID steel tractor wheels

    Post by willowbilly3 on Thu Feb 07, 2013 6:32 pm

    Also the spokes are 2 rows of 9, total 18 and they are swedged into the hub and rim, not riveted.
    avatar
    71ford100

    Posts : 436
    Join date : 2010-01-28
    Age : 28
    Location : Burns, WY

    Re: Help ID steel tractor wheels

    Post by 71ford100 on Tue Feb 12, 2013 8:27 pm

    Is there a part no cast in the center? Could be a gazillon things without a good picture. JD, Oliver, TC, MM, IH all had splines.
    avatar
    willowbilly3

    Posts : 1734
    Join date : 2010-01-30

    Re: Help ID steel tractor wheels

    Post by willowbilly3 on Thu Feb 14, 2013 2:42 pm

    I'll try to get some pictures. They are definitely not IH or McCormick, all those had the spokes riveted in the center. Probably not JD either, all the pictures I could find had none with 18 spokes.

    Sponsored content

    Re: Help ID steel tractor wheels

    Post by Sponsored content


      Current date/time is Fri Dec 15, 2017 10:49 am