Remote master cylinder

This is how much I have done so far. Looks like I need a different setting on the camera.
I am mounting my master cylinder sideways behind the driver's seat area. You can see the rod hanging down that is the push rod from the brake pedal. Everything is just clamped in place right now. Tomorrow I need to find a 3/8 fine clevis end, probably end up making one. I don't know why I didn't order it from speedway when I got the master cylinder.

lookin' good---keep goin'--i do want to take a spin in that one day

Nice work! Gonna put a grease fitting on that pivot for the bellcrank?

Will that work sitting in there sideways?
Wont the bottom of the cylinder go dry?

hardtailjohn wrote:Nice work! Gonna put a grease fitting on that pivot for the bellcrank?

There is one, my pictures are so crappy you can't really see it. It's that little shiny spot right in the middle.

No Spart, I don't think that will be a problem, the top is still up. The second generation Econolines had theirs in sideways.

What is it mounted in? I guess I don't know the rest of the story

[quote="willowbilly3 my pictures are so crappy you can't really see it. [/quote]

well hell...I thought it was my eyes just seeing fuzzy.....

CJ,s 67 F100 wrote:What is it mounted in? I guess I don't know the rest of the story

My roadster pickup project.

Oh wow I like that. Is that back wheel with the white wall a Hurst wheel?

Fenton Hawk wheels. I'd like to fine a pair of 14s for the front but they are pretty big bucks for me.

JB--what is the bolt pattern on your fronts??? i have a pair of crager 5 spoke mags-14 inch--i'll get ya some pics if you are interested--i am in debt to ya, if you have peeps making the trip from tx--we could probally eliminate the shipping--except for giving the delivery man a gracious tip

just remembered also have some keystone 5 spoke--also 14's

take your pick

Ford bolt pattern, 4 1/2"
I've got lots of wheels but nothing that matches front and rear. I actually have 2 more of the Hawks but they are also 15. I wouldn't mind just running stock type steel wheels if I could find a set of 15's for the back with the right hubcap bumps.
The tires that are on it are the height I want. I could go a little wider on the back but I don't want the steam roller T bucket look. Fronts will probably be 185 or 195 14s. I'm looking for a set of 185 x 75 x 14, those would be just right. Probably about a 245/70 x 15 on the back.

i'll have to look, pretty sure i have 2 steelies, 4 and 1/2 , i'll dig them out and make sure.

they are 15's if memory serves

also--i am going to shawnee this week to help out Kevin, as he has hurt himself and has a backlog of mechanic work and some parts salvaging to be finished b4 the crusher goes to work--he has a handle on all the ford cats in that area--bet for sure he can find ya what ya want--kevin was/is tex1264 on the old site--JB, you remember him?? he came to see ya b4 u went north

Picked up a pair of 15" steelies at auction today for $5. They are probably only 6" and I wanted 7" but they will work.