Well, since the weather is crap, and we wanted to/planned to anyway.... the trailer started to get modified. I cut out the permanent feeders and their underneath storage compartments, and cleaned all that crap up. Cut off the doors to the storage, and left the upper "escape" doors for each stall. This gives much more room inside the trailer, and opens up the configurations a bunch. Besides, anytime you have feeders permanently installed, it just winds up rusting, like it did in this one. I added a vertical brace in the middle of each "door" and used the old feeders for the donor steel, so about all we're going to be "out" is the aluminum (already have that) and the styrofoam insulation.
Here's what the left side looked like when it started... notice all the doors for the storage spaces.... and the front load ramp.
Here's a better side view of the whole mess from the other side...
And here's the present stage of completion...due to change today since it's snowing like a jackass out there......
More to follow as we progress.......
JH
Here's what the left side looked like when it started... notice all the doors for the storage spaces.... and the front load ramp.
Here's a better side view of the whole mess from the other side...
And here's the present stage of completion...due to change today since it's snowing like a jackass out there......
More to follow as we progress.......
JH